Click image to view full size image
General Description:
PES series filter cartridge is constructed of imported polyethersulfone （PES）membrane media and nonwoven support materials. The materials of cage, core and end caps are polypropylene. Adaptors are thermally welded with media without using any glue on that, so there is no possibility to cause pollution.
Applications：
● Pharmaceutics
● Food and beverage
● Chemical industry
Features：
● Excellent performance of chemical compatibility
● Hydrophilic membrane with high flow
● Non-fiber releasing according to pharmaceutics and food industry requirements
● Experiencing 100% integrity tested
● Flushed with ultrapure water
● FDA compliance material
Specifications:
Dimensions
● Outside diameter: 2.7” (69mm)
● Length: 9.75",10", 20", 30", 40"
Material Of Constructions:
● Filter media: PP
● Support layer: PP
● Cage/Core/End cap: PP
● Seal Material : Silicone, EPDM, NBR, Viton, Teflon, E-FKM
Performance:
● Removal Rating: 0.1µm, 0.22µm, 0.45µm
● Maximum operating temperature: 85℃
● Maximum operating pressure:4.2Bar @25℃
● Maximum operating pressure (Reverse Direction): 2.1Bar @ 25℃
● Maximum temperature sterilization:20times, 30minutes cycles at 121℃
Darlly Micro Pleated Filter Cartridge-PES P/N:
DLMPES-*-=-#-+ (e.g, DLMPES-0.22-10-P-E)
Code* Removal Rating
0.1 0.1µm
0.22 0.22µm
0.45 0.45µm
Code= Length
9.75 9.75“
10 10“
20 20“
30 30“
40 40“
Code# Code
B DOE Gasket/Gasket(9.75“ increments)
F DOE Gasket/Gasket(10“ increments)
H 213/Flat
J 222/Flat/SS
K 222/Fin/SS
M 222/Flat
P 222/Fin
Q 226/Fin
R 226/Fin/SS
T 226/Flat
V 226/Flat/SS
Code+ Seal Material
S Silicone
E EPDM
B NBR
V Viton
T Teflon
F E-FKM
E-mail: